CBN Grinding Disc For Spring Grinding

Details：
CBN Grinding Wheel Is Used For Compression Springs Surface Grinding On Double Disc Spring Grinders.
Materials Of Workpiece: Spring Steels, Stainless Steel And Titanium Alloy.
Applicable Spring Grinder: Moyer,OMD, Wafios, Dorn, Herckelbout, Hack, Bamatec, Kamatech And Bennet Mahler,Etc.
Advantages Of Electroplated CBN Grinding Disc:
Great On Light Diameter Wire < 2 Mm
Higher Production Rates, Longer Wheel Life And Single Layer Super Abrasive Grain Improves Tolerance
Dressing Is Not Necessary,Produce Less Heat When Grinding
Compared With Conventional Wheels, The CBN Wheels Are Only Worn To About One Hundredth, The Spring Load And Free Length Have Been Constanted. Therefor It Greatly Saves The Inspection Time
Our Used CBN Disc Can Be Stripped And Re-Electroplated With New Grit, If The Steel Body Is Not Damaged
Hub Type Dicing Blade:
Exposure(Μm)	380	510	640	760	890	1020	1150	1270	Grit Size
Kerf Width(Μm)	380 - 510	510 - 640	640 - 760	760 - 890	890 - 1020	1020 - 1150	1150 - 1270	1270 - 1400	#5000
#4800
#4500
#4000
#3500
#3000
#2500
#2000
#1800
#1700
#1500
16 - 20	20 * 380	20 * 510							
21 - 25	25 * 380	25 * 510	25 * 640						
26 - 30	30 * 380	30 * 510	30 * 640	30 * 760	30 * 890	20 * 1020			
31 - 35	35 * 380	35 * 510	35 * 640	35 * 760	35 * 890	35 * 1020			
36 - 40	40 * 380	40 * 510	40 * 640	40 * 760	40 * 890	40 * 1020	40 * 1150		
41 - 50	50 * 380	50 * 510	50 * 640	50 * 760	50 * 890	50 * 1020	50 * 1150	50 * 1270	
51 - 60		60 * 510	60 * 640	60 * 760	60 * 890	60 * 1020	60 * 1150	60 * 1270	
61 - 70			70 * 640	70 * 760	70 * 890	70 * 1020	70 * 1150	70 * 1270	
71 - 80					80 * 890	80 * 1020	80 * 1150	80 * 1270	
81 - 90						90 * 1020	90 * 1150	90 * 1270	

If you have any questions, please contact us