Custom Cutter PCD circular saw blade for laminate Panel Sizing Scoring

What is PCD diamond saw blade?
1: A diamond saw blade is a cutting tool that is mainly welded by pcd diamond tips and a base body.
PCD composite diamond saw blades have become the hardest material cutting tools and have become the cutting edge of woodworking dry cutting tools.
2: Diamond saw blade, Vickers-hardness 10000HV, strong acid resistance, hard to passivate edge, good quality of one-time processing of wood, high wear-resistance, 30 times more wear-resistant than carbide, for particleboard, MDF, wood flooring, stickers. The continuous processing time for panel cutting and machining can reach 300 to 400 hours, and the maximum use-to-use scrap time can reach 4000 hours/piece.
Details：
The PCD saw blade is used for cutting and grooving non-metallic materials, nonferrous materials, particleboard woodworking industry and ultra precision processing industry.
Application of PCD circular saw blade:
1.Wood working industry.Wood Flooring, Particle Board, MDF, Panel Furniture, Cabinet, Firewood, Plywood, Melamine Plywood
2.Non- metallic materials. fiberglass, electronic circuit boards, Bakelite, fibre cement board, acrylic board, plexiglass, rigid plastic
3.Ultra precision processing industry. Aluminum, copper rod, engine cylinder, etc.
Advantages of PCD saw blade:
1.PCD circular saw blade tipped with high strength, not easy to collapse teeth, good sharpness
2.PCD blade’s Sawing end face does not collapse edge, not become black, straight edge angle is good, can improve the appearance of the product quality.
3.The PCD saw blade’s working life is 30-50 times more than carbide saw blades
The table below provides a comparison of the economic indicators between PCD circular saw blades and cemented carbide.
	Pcd circular saw blade	Carbide saw blade
hardness	10000 HV	1200 HV
Wear resistance	50-150 times	1 times
Continuous cutting time	300-400 h	2-5 h
Maximum working time	400 h/ piece	40-70h/ piece

Grade list of carbide saw tips :

Grade	ISO Grade	USA Grade	Cobalt %	Density g/cm3	Hardness HRA	T.R.S N/mm2	Grain Size	Cutting objective
UF01	　	k01	C5	3%	15	94	2500	Submicron	MDF,HDF
UF05	　	K05	C4	5%	14.8	93	2600	Submicron	MDF,Aluminum
UF10	　	K10	C3	5%	15	92	2300	Fine	Hardwood,plastic, steel
UF15	　	K10	C2	6%	14.9	91	2200	Fine	General wood,green wood,cast iron
UF20	　	K20	C1	8%	14.8	90.5	2400	Fine	General wood,green wood,cast iron
YG11C	　	K30	　	11%	14.4	87.5	2600	Medium	General wood
Some size list of standard specification :

Size
(LXWXT)mm	L
mm	W
mm	T
mm	Recommend angel	A
mm
8.0xWx2.5	8.0	W	2.5	30°	70°	0°	1.1
8.0xWx2.8	8.0	W	2.8	30°	70°	0°	1.1
8.0xWx3.0	8.0	W	3.0	30°	60°	0°	1.5
8.5xWx2.3	8.5	W	2.3	25°	70°	0°	0.9
8.5xWx2.5	8.5	W	2.5	30°	70°	5°	1.1
8.5xWx2.8	8.5	W	2.5	30°	70°	0°	1.1
8.5xWx3.0	8.5	W	2.8	30°	70°	0°	1.1
9.0xWx2.3	9.0	W	3.0	30°	70°	0°	1.1
9.0xWx2.5	9.0	W	2.3	25°	70°	0°	0.9
9.0xWx2.8	9.0	W	2.5	30°	70°	0°	1.1
9.0xWx3.0	9.0	W	2.8	30°	70°	0°	1.1
9.5xWx2.5	9.5	W	3.0	30°	70°	0°	1.1
9.5xWx2.8	9.5	W	2.5	30°	70°	0°	1.1
10.0xWx2.8	10.0	W	2.8	30°	70°	0°	1.1
10.0xWx3.0	10.0	W	2.8	30°	70°	0°	1.1
10.5xWx2.5	10.5	W	3.0	30°	60°	0°	1.1

If you have any questions, please contact us