Metal Bond Diamond Cutting Disc Glass Ceramics Tungsten Carbide Cut Off Wheels

What is a cutting blade
The cutting piece belongs to the grinding wheel, which is made of abrasive and adhesive resin and used in ordinary steel, stainless steel and non-metal materials.

Product classification of diamond cutting pieces: divided into resin and metal by binding agent.
1. Main features of the resin cutting sheet: good self-sharpening, sharp cutting and strong binding can improve the surface quality;
2. Main features of metal cutting pieces: strong ability to control abrasive materials, high wear resistance, good shape retention and long service life of cutting pieces.
Scope of application: optical glass, fine ceramics, crystal, magnetic materials, semiconductor materials, etc.
Scope of application: this series of products are suitable for precise processing of the following difficult materials, such as optical glass, crystal materials, magnetic materials, semiconductor materials, fine ceramic materials and other brittle metal materials.


?product specification
purchasing NO.	Diameter	Thickness of Seg.	Hole size	Width
				
YN-SCB	Inch	mm			
	4"	100	1.8/2.2	16/20	5、7
	4.5"	110	1.8/2.2	16/20	5、7
	5"	120	1.8/2.8	20/22	5、10
	6"	150	1.8/2.2	20/22	5、10
	7"	180	1.8/2.2	20/60	7、10
	8"	200	1.8/2.2	25.4/32	7、10
	9"	230	2.0/2.0	25.4/32	7、10
	10"	250	2.0/2.0	25.4/30	7、10
	12"	300	2.0/2.0	25.4/60	10

Main features of diamond cutting pieces:
1. High precision, which can be used for precise grooving and cutting, which can reduce the process
2. The thickness is thin, which can save a large amount of precious cutting materials, save sharp cutting of raw materials and high processing efficiency
3. High rigidity, high strength and long service life


product?use
Glass fiber and resin are used as reinforcing bond materials, with high tensile, impact and bending strength. They are widely used in common steel, stain

If you have any questions, please contact us
To meet your requirements in every way, we need the following information
----- Shape and Dimension of the wheels
----- Grit size (Mesh, refer to Table#1)
----- Concentration
----- Bond(Resinoid, Vitrified, Metallic, Electroplated)
----- Quantity